Setting up a Raspberry Pi based APRS RX IGate with an RTL-SDR
Setting up a Raspberry Pi for Ham Radio with RTL-SDR
Mare & Gal Electronics » Blog Archive » Raspberry Pi + RTL SDR dongle = APRS Rx only gate (Part Two – Decoder)
APRS with the FUNcube Dongle | George Smart – M1GEO
An updated guide to setting up an APRS receive (RX) only iGate using a pre-built image on a Raspberry Pi and an RTL-SDR dongle. Now works with Raspbian Stretch and Direwolf 1.4
DIY: piGate – Raspberry-Pi APRS ‹ SPARKY's Blog
How To Setup APRS – Fuzz The Pi Guy
Raspberry Pi for HAM Radio – Projets radio
Decode APRS Packets – Fuzz The Pi Guy
Decode APRS Packets – Fuzz The Pi Guy
APRS IGate Built Using A Raspberry Pi | Hackaday
Raspberry Pi based APRS Tracker/Digipeater/iGate | VK3IL Blog
APRS with the Atomic Pi
Raspberry Pi APRS IGate is running :-) - DK3WN SatBlog
Setup Raspberry Pi for Ham-Radio
Decoding APRS packets with SDR Dongle - S55MA HAM blog
OK2ZAW - OL9A - QRO.CZ blog
Portable SOTA APRS I-Gate - Third Party Software - SOTA Reflector
TT7 High Altitude Balloon: The APRS iGate
Creating an APRS I-Gate and Digipeater with Baofeng and RTL-SDR
TT7 High Altitude Balloon: The APRS iGate
D-PRS Rx-iGate by Raspberry Pi 2, still a $35 solution | VR2XKP's Blog
Decoding APRS with RTL SDR on Raspberry Pi / Nanopi Neo / Orange Pi using rtl_tcp and multimon/ng - YouTube
How to build a Raspberry Pi APRS Tracker using Dire Wolf | Brandon's Blog
